Product Details
Features:
CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC current, AC/DC voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.
WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.
MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.
SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.
AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the battery.
MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.
Note:
*MUST read the user manual carefully before use for safety.
*Battery not included.
Parameters:
Range
Resolution
Accuracy
AC Current (MAX current: 1000A, True RMS)
Frequency range: 0.1~600A: 40Hz~400Hz
600~1000A: 40Hz~60Hz
60A
0.01A
(2.5%reading+8)
VFD:(5.0%reading+10)
INRUSH:(5.0%reading+10)
600A
0.1A
1000A
1A
DC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
600mV
0.1mV
(0.5%reading+5)
6V
0.001V
60V
0.01V
600V
0.1V
1000V
1V
(0.8%reading+5)
AC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
Frequency range: 40Hz~1kHz, True RMS
600mV
0.1mV
(0.8%reading+5)
6V
0.001V
60V
0.01V
600V
0.1V
750V
1V
(1.0%reading+5)
VFD(750V)
0.1V
(2.0%reading+5)
Resistance
Overload protection: 250V
600Ω
0.1Ω
(1.0%reading+5)
6kΩ
0.001kΩ
60kΩ
0.01kΩ
600kΩ
0.1kΩ
6MΩ
0.001MΩ
60MΩ
0.01MΩ
Diode
It displays the approximate forward voltage value of the diode.
Forward DC current is about 1.5mA;
Overload protection: 250V
Continuity
approx. 30Ω, the buzzer sounds and the LED light on
Test Voltage Approx. 1V
Overload protection: 250V
Capacitance
Overload protection: 250V
10nF
0.001nF
(4.0%reading+5)
100nF
0.01nF
1000nF
0.1nF
10μF
0.001μF
100μF
0.01μF
1000μF
0.1μF
10mF
0.001mF
100mF
0.01mF
(5.0%reading+10)
Frequency/Duty Ratio
Overload protection: 250V
10Hz
0.001Hz
(1.0%reading+3)
100Hz
0.01Hz
1000Hz
0.1Hz
10kHz
0.001kHz
100kHz
0.01kHz
1000kHz
0.1kHz
10MHz
0.001MHz
(3.0%reading+3)
1~99%
0.1%
Temperature
*The below precision does not inlcude the error of thermocouple probe.
℃
1℃
3℃ (-20℃~0℃)
1.0% or2℃ (0℃~400℃)
2.0% (400℃~1000℃)
℉
1℉
6℉ (-4℉~32℉)
1.0% or 4℉ (32℉~752℉)
2.0% (752℉~1832℉)
Log in
Log in
